What's My Wattage

Home › Guides

What size generator do you need for a sump pump?

A 1/2 HP sump pump uses about 1,050 W running but needs about 2,150 W for a second when it starts. A 1/3 HP pump needs about 800 W running and 1,300 W to start.

Calculate your size

We've pre-selected a typical setup — add or remove appliances to match yours.

1. Tick everything you want to run at the same time.

Kitchen
Heating & cooling
Water
Medical & essentials
Around the house
RV & camping
Tools

Safety first: run fuel generators outdoors only, at least 20 ft from doors and windows, and never in a garage. Use battery CO alarms. Connect to home circuits only through a transfer switch or interlock installed by a licensed electrician. More safety info.

Sump pumps are the reason many homeowners buy a generator: power cuts and heavy rain arrive together. The good news is that a sump pump on its own doesn't need a big generator. The catch is the starting surge - the pump's motor pulls two to three times its running power for a moment each time the float switch turns it on.

Sump pump wattage by horsepower

Pump sizeRunning WStarting WMinimum generator
1/3 HP8001,3002,000 W inverter
1/2 HP1,0502,1502,200-3,000 W
3/4 HP1,4002,9003,500-4,000 W
1 HP1,8003,5004,500 W+

Sump pump plus the essentials

Most people want to run more than the pump: the fridge, some lights, the internet and phone chargers. Because motors rarely start at exactly the same moment, you size for the total running load plus the biggest single starting surge. Tick extra appliances in the calculator above to see the size change.

Can a power station run a sump pump?

Yes, if its surge rating covers the pump's starting watts. A 1/3 HP pump typically runs fine on a power station rated 1,800 W continuous / 3,000+ W surge. Runtime depends on how often the pump cycles: in heavy rain it may run 10-20% of the time, so a 1,000 W pump averages 100-200 W, and a 2,000 Wh power station could last roughly 10-15 hours. A dedicated battery-backup sump pump is another good option.

Frequently asked questions

Will a 2000 watt generator run a sump pump?
Usually only a 1/3 HP pump, and only on its own. A 1/2 HP pump needs about 2,150 W to start, which is more than most 2,000 W generators deliver.
How long can a generator run a sump pump?
As long as it has fuel. A 3,000 W generator at light load typically runs 8-12 hours on a tank; check your model's runtime at 25-50% load.
Do I need a transfer switch for a sump pump?
No, if you unplug the pump from the wall and plug it into a heavy-duty extension cord from the generator. A transfer switch lets you power the circuit without unplugging, and must be installed by an electrician.

More sizing guides