What's My Wattage

Home › Guides

What size generator do you need for a well pump?

A 1/2 HP well pump needs about 1,000 W running and 2,100 W starting; a 1 HP pump about 1,900 W running and 4,000 W starting. Most well pumps run on 240 V, so you need a generator with a 240 V outlet.

Calculate your size

We've pre-selected a typical setup — add or remove appliances to match yours.

1. Tick everything you want to run at the same time.

Kitchen
Heating & cooling
Water
Medical & essentials
Around the house
RV & camping
Tools

Safety first: run fuel generators outdoors only, at least 20 ft from doors and windows, and never in a garage. Use battery CO alarms. Connect to home circuits only through a transfer switch or interlock installed by a licensed electrician. More safety info.

No power means no water if you're on a well, so the well pump is often the first thing on a rural homeowner's list. Two things make well pumps harder than other appliances: big starting surges, and 240 V wiring.

Well pump wattage by horsepower

PumpRunning WStarting WSuggested generator
1/3 HP7501,4003,000 W (240 V)
1/2 HP1,0002,1004,500 W (240 V)
3/4 HP1,5003,0005,500 W (240 V)
1 HP1,9004,0007,500 W (240 V)
1.5 HP2,5005,5009,500 W (240 V)

Why 240 V matters

Most submersible well pumps are hard-wired on a 240 V circuit, so you can't plug them into a normal outlet. You need a generator with a 240 V outlet (usually an L14-30 or 14-50) and a transfer switch or interlock installed by a licensed electrician. Many smaller inverter generators only offer 120 V - check before buying.

Check your pump's data plate

Pump horsepower and amps are printed on the control box, usually in the basement or near the pressure tank. Watts = volts x amps. If the pump is deep or old, its start-up draw can be higher than the table.

Frequently asked questions

Will a 3500 watt generator run a well pump?
A 1/3 HP or small 1/2 HP pump on its own, if the generator has a 240 V outlet. For a 1 HP pump plus household essentials, look at 7,500 W or more.
Can a well pump run on 120 V?
Some shallow-well and 1/2 HP jet pumps can be wired for 120 V, but most submersible pumps are 240 V only. Check the control box label.
Can I plug my well pump into a generator?
Usually not directly, because it's hard-wired. You need an electrician-installed transfer switch or interlock.

More sizing guides